Operation method of automatic floor washing machine

Floor washing machine is a kind of cleaning machine which is suitable for hard ground cleaning and sucking up sewage at the same time, and takes the sewage away from the site. It has the advantages of environmental protection, energy saving and high efficiency. The washing machine includes semi-automatic washing machine, full-automatic washing machine, hand push washing machine and driving washing machine.

The washing machine has not been used for a long time in China, but it has been widely used in various fields of developed countries, especially in some stations, docks, airports, workshops, warehouses, schools, hospitals, restaurants, shopping malls and other places with broad hard ground, and the concept of machinery replacing human cleaning has been deeply rooted in people's minds.

Operation method of automatic floor washing machine

1. Untie the power cord and check whether the power cord is damaged and easy to leak. If it is in good condition, install the needle seat, floor washer or floor brush in the anticlockwise direction at the bottom of the machine body. When the ground is washed smooth, install the needle seat to compress the cleaning pad; when the ground is not washed smooth, install the brush. Adjust the handle to an angle convenient for operation.

2. After checking and confirming that the switch is in the off state, plug it in for use.

3. Place the power cord on the back, hold the handle with both hands, and then turn on the switch. At this time, the brush disc or needle disc is level with the ground. Hold the up and down control of the control lever to make the machine move left and right. The brush disc starts to rotate. After confirming that there is no fault, the operation can be started.

4. When working, do not force the machine to move forward and backward by your own strength, but press the handle to move the machine itself, and the human body naturally moves with the machine Note: press the handle down to move the machine to the left. Otherwise, press the handle up to the stage. The machine moves to the right (do not press too much). Press the left handle. The machine moves to the left (when the center of gravity is left). The machine moves forward. Otherwise, press the right hand. When the center of gravity is right, the machine moves backward (do not press too much)

5. When the work is finished or stopped, turn off the switch and the machine stops rotating.