Ground washing machine for oily ground

1. In order to clean the oily ground, first of all, the rubber strip should be selected to prevent oil, so that the recovery of oily sewage on the ground can achieve better results. The non oil proof rubber strip is easy to be corroded by the ground oil stain.

2. We can buy a bottle of oil remover or all-purpose cleaner to add into the clean water tank before cleaning the greasy ground with the floor washer, so as to effectively remove the greasy ground.

3. It is recommended to clean the greasy ground with a brush first, and then use a floor washer to clean it, so as to clean the ground more thoroughly

4. Clean the waste water tank in time after the cleaning of the floor washer to prevent the oil in the waste water tank from corroding the tank. At the same time, the use of oil proof rubber strip and degreaser can achieve satisfactory effect on the ground.

The reason for the low efficiency of washing machine

1. When the driving washing machine is working, the brush disc and the suction cup behind the machine are very close to the ground, and the brush disc needs to rotate at high speed, which will inevitably cause the loss of the brush disc and suction cup when the machine is working. When the machine works for a period of time, the brush disc and suction cup rubber strip will be damaged. The staff should find and replace the brush disc and suction cup rubber strip in time.

2. Through clean water filter and suction pipe. The main function of the water purification filter is to separate the solid impurities and water in the water purification tank. Long time unclean filter is easy to cause serious clogging of the filter, affecting the water outlet, thus affecting the cleaning effect. Long term use of the suction pipe may be blocked by dirt such as hair, so the cleaner also needs to regularly check whether the filter and suction pipe are blocked.

3. The cleaner in the shop often charges the floor washer for 10-12 hours. Many people do not know that long-term charging will also have an impact on the floor washer. This is because when the charging time is too long, excessive electricity will decompose the chemicals in the battery, affect the battery for a long time, shorten the battery life, and more likely to make the battery completely damaged.