Features of driving washing machine

1. It integrates washing and drying. The front double brush disc brush or cleaning pad can effectively clean the stubborn oil stains, stains, dirty water, soil, etc. on the ground; the rear circular arc suction grill can effectively absorb the sewage, and the ground that the floor washing machine passes through can reach the effect of drying completely, and there is no residue in cleaning.

2. Floor types suitable for cleaning, such as: epoxy resin floor, emery floor, tile floor, marble floor, terrazzo floor, cement floor, antiskid floor, small block brick floor, etc.

3. Places suitable for cleaning, such as factory workshop, office building, warehouse, supermarket, hotel, hotel, hospital, school, waiting hall, subway station, etc.

4. Driving type full-automatic operation, automatic lifting brush plate, suction grill, simple and easy to learn.

5. Flexible turning, clean without dead angle, easy to operate.

6. Battery driven, no noise, energy saving and no secondary pollution.

7. Tool free replacement of brush disc and water absorption rubber strip.

How to use the driving washing machine?

1. Untie the power cord and check whether the power cord is damaged and easy to leak. If it is in good condition, install the needle seat, floor washer or floor brush in the anticlockwise direction at the bottom of the machine body. When the ground is washed smooth, install the needle seat to compress the cleaning pad; when the ground is not washed smooth, install the brush. Adjust the handle to an angle convenient for operation;

2. After checking and confirming that the switch is in the off state, plug it in for use.

3. Place the power cord on the back, hold the handle with both hands, and then turn on the switch. At this time, the brush disc or needle disc is level with the ground. Hold the up and down control of the control lever to make the machine move left and right. The brush disc starts to rotate. After confirming that there is no fault, the operation can be started.

4. When working, do not force the machine to move forward and backward by your own strength, but press the handle to move the machine itself, and the human body naturally moves with the machine.